If you want to install Windows XP, but your notebook (or PC) has no CDROM, you should install Windows XP using USB Flash disk/Flash Drive/Thumb drive... just follow this guide :
step 1: Buy an USB Flash Drive (at least 2GB). When you do this tutorial, please make sure your computer/laptop/PC has a CD-ROM (or DVD). so, now you have 2 computers, with CD-ROM support and without CD-ROM support (e.g Acer Aspire One, Asus EEE-PC).
Destination Drive : select USB Removable check on Enable Disk Format check on Quick Format check on Enable LBA (FAT 16x) Drive Label : XP-KOMKU (or whatever you want) then click Start
Click Yes to continue....
"You are about to repartition and format a disk.Disk: ....All existing volumes and data on that disk will be lost.Are You Sure You Want To Continue?" click Yes
Wait a few seconds... Click OK, and you can close PeToUSB window.
step 5: Open Command Prompt ... Click Start > Run > type cmd > click OK
On Command Prompt window, go to directory C:\Komku\bootsect\ how to do this? first type this cd\ and press Enter then type cd komku\bootsect and press Enter the result...
Don't close Command Prompt window, and go to step 6...
step 6: on command prompt window, type bootsect /nt52 H:
H: is drive letter for my USB Flash Drive, it may be different with yours...
and press Enter
the result... "Successfully updated filesystem bootcode. Bootcode was succesfully updated on all targeted volumes."
don't close Command Prompt window, and go to step 7...
step 7: now type this cd..andpress Enter
then type cd usb_prep8 and press Enter type usb_prep8 again... and pres Enter
step 8: Your command prompt window will look like this
Press any key to continue... usb_prep8 welcome screen will appear
Prepares Windows XP LocalSource for Copy to USB-Drive: 0) Change Type of USB-Drive, currently [USB-stick] 1) Change XP Setup Source Path, currently [] 2) Change Virtual TempDrive, currently [T:] 3) Change Target USB-Drive Letter, currently [] 4) Make New Tempimage with XP LocalSource and Copy to USB-Drive 5) Use Existing Tempimage with XP LocalSource and Copy to USB-Drive F) Change Log File - Simple OR Extended, currently [Simple] Q) Quit
Enter your choice:_
now, insert your original Windows XP CD, or Windows XP with sata ahci driver to your CD/DVD ROM and back to Command Prompt window
type 1 then press Enter... "Browse For Folder" window will appear, select your CD/DVD drive and click OK
the result... "XP Setup Source Path" changed to G:\(yours may be different)
now for point 2, if letter T is currently assigned to a drive in your computer, you must change it.... if not, leave it as it is how to change it? type 2 and press Enter...
"Enter Available Virtual DriveLetter" for example you doesn't have drive S so you type S and press Enter
back to usb_prep8 welcome screen... now type 3 and press Enter...
"Please give Target USB-Drive Letter e.g type U"Enter Target USB-Drive Letter: because my Flash drive letter is H so, type H and press Enter...
after back to usb_prep8 welcome screen... now type 4 and press Enter to make new temporary image with XP LocalSource and copy it to USB Flash Drive please wait a few seconds..
"WARNING, ALL DATA ON NON-REMOVABLE DISKDRIVE T: WILL BE LOST!Proceed with Format (Y/N)?" type Y and press Enter please wait.... when format virtual disk complete, press any key to continue...
please wait... making of LocalSource folder is in progress...
when "Making of LocalSource folder $WIN_NT$.~LS Ready" Press any key to continue...
"Copy TempDrive Files to USB-Drive in about 15 minutes = YesOR STOP = End Program = No" Click Yes, and wait...
"Would you like USB-stick to be preferred Boot Drive U:bla... bla..." Click Yes
"Would you like to unmount the Virtual Drive ?" Click Yes, wait a few seconds, and press any key.... press any key again to close usb_prep8...
Now, your USB Flash Drive is ready...
step 9: Now, insert your USB Flash Drive to your notebook (e.g Acer Aspire One) go to BIOS and make USB HDD (or USB ZIP in some other machine) as primary boot device....
then boot form your USB Flash Drive.... and select "TXT Mode Setup Windows XP, Never unplug USB-Drive Until After Logon"
After Hard Disk detected, delete all partition (except data partition), and then create Primary os partition... and install Windows XP on that partition... and wait...
once text mode setup is complete, computer will restart.... this time select "GUI Mode setup Windows XP, Continue Setup + Start XP"
Continue Windows XP setup.... and Done!
Windows XP Installed....
Remember, you can use this tutorial to install Windows XP on all other computers.. not just Aspire One and Asus EEE-PC....
step 1: Insert your Windows 7 DVD and plug in your USB flash drive. Download newest version of WinToFlash then open WinToFlash.exe
step 2: This program will transfer Windows setup from optical to USB driveRecommended to switch on Wizard mode for users have no experience of Windows setup fine tuning
step 4: Specify the location of windows setup files and USB drive... be careful, don't make any mistake... in my computer, Windows file path: G:\ and USB drive: H:\ it might be different with yours...
step 10: Plug in your USB flash drive.... then turn on your computer (laptop) change Boot priority order: USB flash drive as first boot option your computer will reboot...
on first "restart" you must go to BIOS again and change boot priority order: HDD as first boot option then press F10 key to save the configurations and exit....
The R9 TP irons come equipped with KBS Tour Series steel shafts, which is currently the fastest growing steel shaft brand on the PGA Tour ishiner. Several of TaylorMade’s Tour for golf clubs for sale Staff pros are in the same KBS shaft that’s in the R9 TP including Kenny Perry, Dustin Johnson and Rory Sabbatini who have each used them to win once.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum
Topic Options
